WELLUCK RV Sewer Hose Support. Keep Your Hose Off the Ground.
A sewer hose dragging on the ground pools waste, wears through faster, and creates backflow problems. The fix is simple. A hose support holds your line at a downward angle from the RV to the dump inlet. This WELLUCK support does that. 10 feet of coverage, adjustable height, collapses flat when done.
What It Does
- Holds 10 feet of hose off the ground at a consistent downward slope
- Adjustable height on each segment — works on uneven ground at any campsite
- Blaze orange color — visible in low light so nobody trips on your setup
- Rubber band keeps it secure when collapsed — no loose pieces
- Carry strap included — moves with the rest of your dump kit
- Works with all standard RV sewer hoses — fifth wheel, travel trailer, motorhome
Why It Matters at the Dump Station
When your hose lays flat on the ground, solids pool instead of draining fully. Over time that causes odor and blockage. A supported hose drains cleaner every time. At a busy RV park or dump station, it also keeps your hose out of whatever else is on that concrete slab.
Setup and Takedown
Unfolds in under a minute. Adjust each segment height to match the slope of the ground. Slide your hose into the cradles. When done, collapse and secure with the rubber band. Fits inside the Camco RhinoEXTREME storage box if you run that combo.
Shop the WELLUCK RV Sewer Hose Support
Tap below. Opens directly in your Amazon app.
Some links may be affiliate links. I only share products I use. Full disclosure.